1. Which toy horn will produce the higher pitched sound? A.
A B.
B C.
No difference
|
![](testpage_html_m15c7c177.png)
|
2. Which arrow shows the path of a ball thrown by hand? A.
A B.
B C.
C
|
![](testpage_html_m676e7d88.png)
|
3. Which object would make a stop-and-go turning motion?
A.
A B.
B C.
C
|
![](testpage_html_m6ab7a232.png)
|
4. Which way should the drill turn as it is forced into the
piece being drilled? A.
A B.
B C.
Doesn't matter
|
![](testpage_html_80f94f5.png)
|
5. Which lever would require less force to lift the
weight? A.
A B.
B C.
No difference
|
![](testpage_html_210ea4ba.png)
|
6. The metal cap on the glass bottle is stuck. Which will
make it easier to turn? A.
Hot water B.
Cold water C.
No difference
|
![](testpage_html_m533b3bd2.png)
|
7. Which pulley is running the fastest? A.
A B.
B C.
C
|
![](testpage_html_15b4b5bd.png)
|
8. A zipper is hard to zip. Which would make it easier? A.
Soap B.
Sandpaper C.
No difference
|
![](testpage_html_m20a1897c.png)
|
9. The balloons are filled with the same amount of air and
then put in different rooms. After a few minutes, in which room
will the balloon be bigger? A.
20°C B.
40°C C.
No difference
|
![](testpage_html_11bf488b.png)
|
10. Which soldering iron of equal weight will cool
faster? A.
A B.
B C.
No difference
|
![](testpage_html_m38f95d8d.png)
|
11. To construct a square using the largest piece at left,
what shape tiles must be added? A.
A B.
B C.
No other tile needed
|
![](testpage_html_m47488e13.png)
|
12. What cools most microwave ovens? A.
Fan B.
Radiator C.
Neither
|
![](testpage_html_4bc8e469.png)
|
13. Which saw would go through a thick board faster? A.
A B.
B C.
No difference
|
![](testpage_html_m586dc778.png)
|
14. You want to hang three pictures evenly spaced,
side-by-side upon a wall. Which dimension is more important to
know? A.
The length B.
The width C.
Both
|
![](testpage_html_5b8d0a37.png)
|
15. Which scissors would cut a thick piece of cardboard
best? A.
A B.
B C.
No difference
|
![](testpage_html_350d007.png)
|
16. Which heating method is more efficient for a room? A.
Fireplace B.
Wood stove C.
No difference
|
![](testpage_html_485486a4.png)
|
17. Which object would reach the ground first? A.
A B.
B C.
No difference
|
![](testpage_html_m5199b253.png)
|
18. Each gear rotates about its own axis. Gear A is driven in
a clockwise manner. In what direction and at what speed will
Gear C turn with respect to Gear A? A.
Clockwise and faster than A B.
Clockwise and slower than A C.
Counterclockside and faster than A
|
![](testpage_html_1eaa528c.png)
|
19. Pam is riding in a railroad box car, which is going north
at a constant 35 mph. She jumped 2 feet straight up. When she
landed, what was her position in the box car? A.
A few inches behind the original spot B.
On the original spot C.
A few inches ahead of the original spot
|
![](testpage_html_171ff35c.png)
|
20. Which object will float higher in water? A.
Apple B.
Pepper C.
No difference
|
![](testpage_html_m76b03d71.png)
|
21. Which wire would have greater resistance? A.
A B.
B C.
No difference
|
![](testpage_html_35651169.png)
|
22. Which would be a better conductor of electricity? A.
Copper wire B.
Aluminum wire C.
No difference
|
![](testpage_html_519539cc.png)
|
23. Find the total resistance from A to C A.
3 ohms B.
4 ohms C.
5 ohms D.
7 ohms E.
23 ohms
|
![](testpage_html_m67fac53f.png) This
figure is an electrical circuit. The current flows as shown by
the arrows. Resistance is equal to the sum of the values for the
resistors. Use the table to find the value for the resistors.
|
24. What is the total resistance from B to D A.
13 ohms B.
14 ohms C.
15 ohms D.
16 ohms E.
17 ohms
|
![](testpage_html_m67fac53f.png)
|
25. In Area 3, if all valves are open, which column will fill
last? A.
Column A B.
Column B C.
Column C D.
Column D
|
![](testpage_html_m52c2e43f.png)
|
26. In Area 3, if all valves are open except 3, 6, and 7,
which column will fill first? A.
Column A B.
Column B C.
Column C D.
Column D
|
![](testpage_html_m52c2e43f.png)
|
27. In Area 1, to prevent liquid from flowing into column 20
from Column 21, you must close A.
Valve A B.
Valve B C.
Valve C D.
Valve D
|
![](testpage_html_m4e8c81cb.png)
|
28. In Area 1, if valve D is closed, liquid will not flow
beyond A.
The mixer B.
Column 20 C.
Column 21 D.
Column 22
|
![](testpage_html_m4e8c81cb.png)
|
29. The signal on line 1 is off between A.
G and H B.
F and G C.
D and C D.
C and B
|
![](testpage_html_43db7d00.png)
|
30. The signal on line 2 is off between A.
D and E B.
F and G C.
A and B D.
C and D
|
![](testpage_html_43db7d00.png)
|
31. Which of the following boxes is NOT outputting a signal
on Line 1? A.
H B.
B C.
G D.
D
|
![](testpage_html_43db7d00.png)
|
32. The signal on line 1 is off between A.
E and D B.
F and C C.
F and A D.
A and B
|
![](testpage_html_5b263d8.png)
|
33. The signal on line 2 is off between A.
A and B B.
A and F C.
H and E D.
B and G
|
![](testpage_html_5b263d8.png)
|
34. Which of the following boxes is NOT outputting a signal
on line 2? A.
A B.
B C.
H D.
C
|
![](testpage_html_5b263d8.png)
|
35. A.
A B.
B C.
C D.
D
|
![](testpage_html_466d18dd.png) In
order for the connection between points 1 and 2 to be complete,
the current must pass through 5 contacts in exactly the
following order:
![](testpage_html_m11e6e228.png)
Refer
to this schematic to determine which connection is complete.
|
36. A.
A B.
B C.
C D.
D
|
![](testpage_html_m6c261830.png) In
order for the connection between points 1 and 2 to be complete,
the current must pass through 5 contacts in exactly the
following order:
![](testpage_html_m11e6e228.png)
Refer
to this schematic to determine which connection is complete.
|
37. A.
A B.
B C.
C D.
D
|
In order for the connection between points 1 and 2 to be
complete, the current must pass through 5 contacts in exactly
the following order:
![](testpage_html_m11e6e228.png)
Refer
to this schematic to determine which connection is complete.
![](testpage_html_m4341e1c8.png)
|
38. A.
A B.
B C.
C D.
D
|
![](testpage_html_3dddb395.png) In
order for the connection between points 1 and 2 to be complete,
the current must pass through 5 contacts in exactly the
following order:
![](testpage_html_m11e6e228.png)
Refer
to this schematic to determine which connection is complete.
|
39. A.
A B.
B C.
C D.
D
|
![](testpage_html_m3e34acb8.png) In
order for the connection between points 1 and 2 to be complete,
the current must pass through 5 contacts in exactly the
following order:
![](testpage_html_m11e6e228.png)
Refer
to this schematic to determine which connection is complete.
|
40. A.
A B.
B C.
C D.
D
|
![](testpage_html_3f947654.png) In
order for the connection between points 1 and 2 to be complete,
the current must pass through 5 contacts in exactly the
following order:
![](testpage_html_m11e6e228.png)
Refer
to this schematic to determine which connection is complete.
|